Sparkler Filter Press [ Size 8" Dia X 6 Plates ]

Sparkler Filter Press Machine Size 8″ dia X 6 Plates, GMP Model with all contact parts SS316

Technical Specifications

ModelMM- FP  8” dia x 6 Plates
No. of Plates6 Nos.
Height of Plates25mm
Thickness of Plates18 swg
Shell Thickness1.6mm
Bottom Plate6mm
Scavenger Plate10mm thick
Top Lid1.6mm with skirt ring
Support Screen7 Nos. of 1.2mm thk
Interlocking Cup7 nos.
M.O.C.S.A.240 Gr. S.S.  304 / 316/316L quality.
Filtering Area0.209 m2.
Cake Holding Cap.4.78 Ltrs.
Output*600 – 1000 * Ltrs/hr.
Pump½ ” Centrifugal pump with TC V/S TC Seal and coupled to 1 HP 3 phase 1400 rpm NFLP motor
GasketNeoprene/Silicon. 
Nozzles  Inlet¾” NB
Nozzles   Outlet½” NB
Airvent¼” BSP
Dial type Pressure Guage¼” BSP – 7Kg
End ConnectionNozzle type.
Surface FinishMirror polished.
TrolleySS304 trolley with SS Bracket, fibre castor wheels
Dimensions840x535x895 Approx
(Depends on liquid to be filtered quality of filter media & percentage of solid contents.
* Output rate in terms of 5 % activated carbon & water.)

Sparkler Filter Press -Zero Hold Up -14” X 10 Plates

Sparkler Filter press- Zero Holdup 14 x 10 Plates, GMP Model with all contact parts SS 316 and Non Contact parts SS 304.
It consists of a strong S.S. tank with a S.S. top dish end. The tank is mounted on a bottom cover. The filtering unit shall be fitted in the centre of the tank and consists of one set of S.S.plates with performed screens and interlocking cups. The S.S. bottom cover fits on the gasket and the tightening ring nuts provided leak proof seal. An air vent is provided on the top and pressure gauge is provided at the inlet connection.

The filter press consists of following features :

Diameter of Plate14”
No. of Plates10
Total Filtration Area1.4 m2
Total Cake Holding Cap.45 Kgs.
Hydro Test Pr.4 Kg./Cm2
Output3000 L/Hr
Wetted Parts S.S. 316 L
Non Wetted Parts S.S. 304
Trolley S.S. 304
Seal Material Food Grade Silicon
Surface Finish Polished
Inlet 1 ½ “ NB nozzles
Oulet 1 ½ “ NB nozzles
Air Vent ¼ “BSP
Sampling valve ¾ “ NB nozzle
Model No. MMCP3HP
Type Gear pump
Capacity (L/ Hr.) 12000 (depends upon viscosity of liquid)
Wetted Parts S.S. 316
Non Wetted Parts S.S. 304
Connection Type Nozzles
Suction 1 ½ “
Discharge 1 ½ “
Gasket Silicon Food Grade
Drive Non – FLP Motor (415 V/ 3 . / 50 C/S)
Motor RPM 2800
Motor HP 3
Mobile Trolley S.S. 304 Trolley with castor wheel and handle to filter press, Centrifugal pump and Interconnecting pipe line.

Sparkler Filter Press -Zero Hold Up -18” X 18 Plates

It consists of a strong S.S. tank with a S.S. top dish end. The tank is mounted on a bottom cover. The filtering unit shall be fitted in the centre of the tank and consists of one set of S.S. plates with performed screens and interlocking cups. The S.S. bottom cover fits on the gasket and the tightening ring nuts provided leak proof seal. An air vent is provided on the top and pressure gauge is provided at the inlet connection.

The filter press consists of following features :

Diameter of Plate 18”
No. of Plates 18
Total Filtration Area 1.8 m2
Total Cake Holding Cap. 70 Kgs.
Hydro Test Pr. 4 Kg./Cm2
Output 4500 L/Hr
Wetted Parts S.S. 316 L
Non Wetted Parts S.S. 304
Trolley S.S. 304
Seal Material Food Grade Silicon
Surface Finish Polished
Inlet 1 ½ “ NB nozzles
Oulet 1 ½ “ NB nozzles
Air Vent ¼ “BSP
Sampling valve ¾ “ NB nozzle
Model No. MMCP3HP
Type Centrifugal pump
Capacity (L/ Hr.) 12000 (depends upon viscosity of liquid)
Wetted Parts S.S. 316
Non Wetted Parts S.S. 304
Connection Type Nozzles
Suction 1 ½ “
Discharge 1 ½ “
Gasket Silicon Food Grade
Drive Non FLP Motor (415 V/ 3 . / 50 C/S)
Motor RPM 2800
Motor HP 3
Mobile Trolley S.S. 304 Trolley with castor wheel and handle to filter press, Centrifugal pump and Interconnecting pipe line.